The liquid resin will need to be scraped off before you pour a fresh coat. Sticky, tacky resin: often caused by inaccurate measuring, not mixing thoroughly or by curing in cold temperatures. Try moving your piece to a warmer spot: if it doesn't dry, re-pour with a fresh coat of resin. Soft, sticky spots: if you have sticky spots on an otherwise perfectly cured surface, you may have scraped out unmixed resin or hardener from your mixing container when you poured.
Scrape off liquid resin as best you can and pour a fresh coat. Be sure to measure and mix your resin properly, so this problem will not occur again: Measure ArtResin in precisely equal amounts by volume: Adding too much of either resin or hardener will alter the chemical reaction and the mixture will not cure properly.
Adding more hardener will not make the resin cure faster or harder. You may have measured by weight, not volume: ArtResin was formulated to be measured in equal amounts by volume. You may have accidentally mixed two parts of resin or two parts of hardener: the chemical reaction requires equal parts of resin and hardener in order to harden. How To Fix It: If you have areas with runny or gooey resin, you'll have to scrape off as much wet material, as best you can.
If you don't remove all the wet material, it could eventually leak out from under the new resin coat. Once you've scraped your piece down, then go ahead and pour a fresh coat of carefully measured and thoroughly mixed ArtResin. Sticky Situation 2: Tacky Resin What It Looks Like: The resin has started to cure but the surface is still tacky, like the sticky side of tape Why It Happened: The temperature of your resin room may be too cold: the ideal temperature in which to cure resin is F or C for the first 24 hours.
Inaccurate measuring: always measure ArtResin in precisely equal amounts, by volume. Under mixing: mix thoroughly for at least 3 minutes, scraping the sides and bottom of the mixing container as your stir.
How To Fix It: Try moving your piece to a warmer spot for 24 hours to see if it dries. If temperature was not an issue and your resin is simply tacky, count yourself lucky: this is the easiest fix of all 3 sticky situations. In fact, as long as you don't have any soft or wet areas if you do, that liquidy resin needs to be scraped you don't need to do a thing: go ahead and pour a fresh coat of carefully measured and thoroughly mixed ArtResin directly over the entire tacky resin surface.
When the fresh resin cures, you'll never know you ever had a sticky resin issue. Why It May Have Happened: You may have scraped the sides of your mixing container after you poured: although we recommend scraping the sides and bottom of your container when you're mixing, we DON'T recommend scraping when you pour your ArtResin onto your artwork like you might if you were scraping cake batter out of a mixing bowl and into a cake pan.
If any unmixed resin or hardener stuck to the sides gets scraped out onto your artwork, you'll end up with soft wet spots in your cured resin. How To Fix It: Sand down any perfectly cured areas with coarse sandpaper, such as 80 grit. Wipe up any sanding residue with a damp paper towel. This is a big factor to consider when curing the resin.
Keep in mind that warm temperatures make curing times a bit faster and colder temperatures will make curing times a bit slower.
For Artist Resin, the ideal room temperature is between degrees. If the temperature is colder than that, the resin will thicken and be harder to mix, and bubbles will possibly appear. It will also take longer to cure. Make sure Part A and Part B are the same brand.
Mixing resin brands should be avoided. Keep in mind that every paired resin and hardener works together as a system and should not be interchanged. Follow our simple instructions— measure and mix properly— and you will have beautifully cured resin for your Artist Resin projects.
Culture Cash Explained. Why Is My Resin Sticky? Previous Next. Using Wet Utensils One thing you need to know about resin is that it does not like water. Leave it in the mold and just let it sit in the sun. The funny thing is I dipped 6 pairs 4 dried perfect while 2 pair are still sticky after 2 days, so I put them in the sun.
I hope it works. I have a frame that I poured a few months ago and one of the corners is still tacky. I really am hesitant to try sanding it out because it is decorated with beach glass and shells and old jewelry. Thanks for any help or suggestions!! Im doing coasters and love making them , but they all get stuck to the glass? How can i avoid this from happening? Hi, I want to paint a design on a tray. I was thinking of using satin paint as a base colour then acrylic paints for the design before using resin to coat it.
Do you think this would work please. Many thanks Lynn. I made a set of geode coasters. They are sticky and bendy. I mixed properly, and measured properly because I did something else with some of the resin I had left over. What can I do with them? Hi Tonya, it may be the resin you are using. In that case, there is nothing you can do to make them less bendy. Perhaps you can put a firm backing on them? I tried casting dice with silicon molds I made myself and the first attempt came out sticky, and the leftover resin I left to dry in a silicon mixing cup was sticky along the corners.
I thought it was the mixing ratio to I popped them out, washed the molds and tried again, but again the dice are sticky and this time the leftover resin in the cup was completely hardened?? Both were in the same area to dry. But every time the resin is either soft on some molds and sets in others. I have now purchased a new resin and exactly the same thing is happening.
I live in Spain so the room is warm. I wondered if it is glitter or colours i am mixing in, I have looked into guide lines for measurements etc. Please help as spent a lot of money trying to get this to work and enjoy doing it, and want to sell some of my work. Could you also recommend a really good resin to use, i am now trying Resin pro Thank you. Have you connected with the manufacturer for help?
This too was a concern for me in the beginning and now I try to achieve the colors I desire with the least amount of ink drops inside. I hope that helps to know.
I know I was distressed about it initially. The stickiness has been covered thank you! I am using acrylic paint on glass jars pieces. The painting process usually runs approximately months with several oven-drying times throughout. Just before completing with the resin, I bake the glass once more and cool days.
The resin runs are not throughout or uniform, just random spots. Hi Deann, try sealing the paint with a couple layers of our gloss sealer spray.
0コメント